Computer Netzwerke und Komponenten

The SSD hard drive EMTEC ECSSD240GX150 offers a reliable and fast storage solution to upgrade desktop and laptop computers, thanks to its 240 GB capacity and standard 2.5" format in black . Designed specifically as an SSD for PC , it uses a Serial ATA III (SATA III) interface with bandwidth up to 6 Gbit/s , enabling read speeds up to 520 MB/s and write speeds up to 500 MB/s , significantly reducing operating system boot time, application loading and file transfer compared with traditional mechanical hard drives. Its 2.5" format and slim 7 mm profile make it compatible with most modern PC cases and laptops, allowing both new installations and direct replacement of existing HDDs. It includes SSD-specific technologies such as S.M.A.R.T. support to monitor drive health, TRIM command to maintain long-term performance, and ECC for error correction, contributing to greater stability and data protection. With an MTBF of 2,000,000 hours , it is designed for daily use in office, home or study environments, offering a good balance between performance, power consumption and durability. Supplied in blister packaging , this EMTEC SSD is a practical and efficient option to clearly improve the responsiveness and smoothness of any SATA-compatible computer. Type: Internal SSD Hard Drive: 240 GB SSD Colour: Black Form factor: 2,5" Connections: SATA Sata III Size: 3,5" 2,5" Compatible: PC Computers Speed: 6 Gbps 500 Mb/s

The EMTEC X150 Power Plus Hard Drive is an internal storage device specially designed for desktop and laptop computers seeking performance and reliability in data management. This 480 GB SSD hard drive offers notable capacity to store operating systems, applications, and files with solid space suitable for most everyday and professional uses. It operates via the SATA III interface, providing transfer rates up to 6 Gbps , ensuring fast communication with the system and reduced response times, superior to traditional mechanical drives. It stands out for its high read and write speeds, with peaks of up to 520 MB/s read and 500 MB/s write , resulting in quick system boot, fast application loading, and an improved overall file management experience. Its slim 2.5-inch form factor and only 7 mm height make installation easy in a wide range of computers additionally, the black-colored casing offers a sober, professional design. It includes support for key technologies such as S.M.A.R.T. and TRIM , which help maintain performance and extend the drive’s lifespan by optimizing internal data management. With an estimated mean time between failures of 2 million hours, it is reliable storage for projects, multimedia, and data backup. Without NVMe support or hardware encryption, this model maintains a classic, straightforward approach, ideal for users requiring speed and stability on SATA interface systems. Its construction incorporates ECC for error correction, ensuring data integrity. In short, the EMTEC X150 Power Plus combines efficiency, durability, and speed in an SSD hard drive that significantly improves the performance of any PC compatible with SATA III, making it a balanced solution to upgrade or expand storage with current technology. Hard Drive: 480 GB SSD Type: SSD Internal Colour: Black Multicolour Material: Plastic Connections: SATA Sata III Size: 3,5" 2,5" Compatible: PC Computers Speed: 6 Gbps 500 Mb/s

The SSD hard drive GoodRam CX400 gen.2 is a 2.5" internal solid state drive designed to upgrade desktop and laptop computers that use the SATA III (6 Gbps) interface, offering a clear improvement over traditional mechanical hard drives. With a 256 GB SSD capacity , it is suitable for installing the operating system, main applications and a moderate amount of files, noticeably speeding up system boot and program loading. Its TLC 3D NAND memory technology delivers a good balance of performance, durability and energy efficiency, while speeds of up to 550 MB/s read and around 490 MB/s write enable fast data transfer, ideal for office environments, advanced home use or upgrading older systems. The standard 2.5" form factor with approximate dimensions of 10 x 6.98 x 0.7 cm makes it easy to install in most compatible towers and laptops, and its plastic housing helps keep weight low without compromising basic protection of the internal module. This SSD for PC operates correctly in a typical temperature range of 0º to 70ºC , ensuring stability under normal use, and with no moving parts it offers silent operation and higher resistance to shocks and vibrations compared with conventional HDDs. Designed as an affordable internal SATA SSD, the GoodRam CX400 gen.2 256 GB is a practical solution to improve overall system performance and extend the service life of systems with a SATA III interface. Technology: SSD Speed: 550 MB/s 480 Mb/s 490 MB/S 6 Gbps Type: 2.5" SSD TLC 3D NAND Approx. dimensions: 10 x 6.98 x 0.07 cm 10 x 7 x 7 cm Approx. diameter: Ø 10 cm Data transfer: 6 Gbit/s Recommended use: Desktop PC Length: 7 cm Memory Type: 3D TLC NAND Compatible: Laptop PC Depth: 7 mm Height: 0,7 cm Material: Plastic Form factor: 2,5" Hard Drive: 256 GB 256 GB SSD Connections: SATA USB x 3 Sata III Size: 2,5" Width: 10 cm Working range for temperature: 0º / 70º Type of storage: SSD SSD CX400 gen.2 SATA III 2,5″ Forget about your spinning drive and treat yourself a 10x performance improvement by moving to CX400 gen.2 Solid State Drive. Apart for delivering better responsiveness your data will be much safer, as CX400 gen.2 doesn’t have any moving parts and is incomparably more shock and impact resistant than hard drive. Breathe life back into your computer GOODRAM presents the next generation of popular SSDs, dedicated to home and office solutions. CX400 gen. 2 is the name of the new SSD series targeted at users looking for a much faster and more reliable alternative to a traditional hard drive. Wide range of use If your computer is performing slower than you like, replacing the HDD with an SSD is one of the most cost-effective changes you can make. It will completely change your computing experience. SSDs are faster because they call up data more rapidly, so they accelerate boot-up times and apploading. Reliable 3D TLC GOODRAM CX400 gen. 2 SSD provides best-in-class performance and reliability. The refreshed disk is equipped with 3D TLC NAND Flash memory. Detailed firmware guaranteefull software data protection, consistency and security during use. SSD form factor: 2.5" SSD capacity: 256 GB Interface: Serial ATA III Memory type: 3D TLC NAND NVMe: N Component for: PC Data transfer rate: 6 Gbit/s Read speed: 550 MB/s Write speed: 480 MB/s Random read (4KB): 65000 IOPS Random write (4KB): 61440 IOPS Mean time between failures (MTBF): 2000000 h Operating temperature (T-T): 0 - 70 °C Storage temperature (T-T): -45 - 85 °C Width: 100 mm Depth: 69.8 mm Height: 7 mm Package type: Blister

The SSD hard drive GoodRam CX400 gen.2 is designed to upgrade desktop and laptop computers that use the 2.5" format, offering a clear performance boost compared to traditional mechanical hard drives. With a 512 GB SSD capacity , it provides enough space for the operating system, intensive programs and a large file library, keeping load times very low. Its SATA III interface up to 6 Gbps and read/write speeds of up to 550 MB/s and approximately 490–500 MB/s enable fast data access, improving system startup, application opening and large file transfers. It uses TLC 3D NAND memory, a stacked-cell technology that optimizes storage density and durability, suitable for daily use in work and entertainment environments. The 2.5" form factor with approximate dimensions of 10 x 6.98 x 0.7 cm makes it compatible with most standard PC and laptop bays, allowing replacement of an existing drive without special adapters. Its solid-state drive design with no moving parts reduces noise and heat, improves resistance to shocks and vibrations and contributes to greater long-term reliability. It operates in an approximate temperature range of 0º to 70º , suitable for most common desktop and laptop usage scenarios. This GoodRam CX400 gen.2 SSD is a balanced solution for users who want to increase system speed and responsiveness while maintaining good storage capacity and compatibility with existing equipment. Approx. dimensions: 10 x 6,98 x 0,7 cm 10 x 7 x 7 cm Compatible: Laptop PC Computers Technology: SSD Speed: 450-550 MB/s 550 MB/s 490 MB/S 6 Gbps 500 Mb/s Approx. diameter: Ø 10 cm Hard Drive: 512 GB SSD Type: SSD Internal TLC 3D NAND Data transfer: 6 Gbit/s Recommended use: Desktop PC Length: 7 cm Memory Type: 3D TLC NAND Depth: 7 mm Height: 0,7 cm Characteristics: Wireless Connections: SATA USB x 3 Sata III Size: 2,5" Width: 10 cm Working range for temperature: 0º / 70º Type of storage: SSD SSD CX400 gen.2 SATA III 2,5″ Forget about your spinning drive and treat yourself a 10x performance improvement by moving to CX400 gen.2 Solid State Drive. Apart for delivering better responsiveness your data will be much safer, as CX400 gen.2 doesn’t have any moving parts and is incomparably more shock and impact resistant than hard drive. Breathe life back into your computer GOODRAM presents the next generation of popular SSDs, dedicated to home and office solutions. CX400 gen. 2 is the name of the new SSD series targeted at users looking for a much faster and more reliable alternative to a traditional hard drive. Wide range of use If your computer is performing slower than you like, replacing the HDD with an SSD is one of the most cost-effective changes you can make. It will completely change your computing experience. SSDs are faster because they call up data more rapidly, so they accelerate boot-up times and apploading. Reliable 3D TLC GOODRAM CX400 gen. 2 SSD provides best-in-class performance and reliability. The refreshed disk is equipped with 3D TLC NAND Flash memory. Detailed firmware guaranteefull software data protection, consistency and security during use. SSD form factor: 2.5" SSD capacity: 512 GB Interface: Serial ATA III Memory type: 3D TLC NAND NVMe: N Component for: PC Data transfer rate: 6 Gbit/s Read speed: 550 MB/s Write speed: 500 MB/s Random read (4KB): 75500 IOPS Random write (4KB): 76800 IOPS Mean time between failures (MTBF): 2000000 h Operating temperature (T-T): 0 - 70 °C Storage temperature (T-T): -45 - 85 °C Width: 100 mm Depth: 69.8 mm Height: 7 mm Package type: Blister

The HPE hard drive model J9F43A is a unit designed to provide reliable, high-performance storage in professional environments such as servers and workstations. This device features a 6 TB capacity , ideal for storing large volumes of data. Its 3.5-inch (LFF) form factor and SAS (Serial Attached SCSI) technology ensure a fast, stable connection with transfer speeds up to 12 Gbps , optimizing data management and access. The drive operates at 7200 RPM , a perfect balance between speed and durability for business applications requiring constant data access without compromising device lifespan. Additionally, it is compatible with Windows and Linux operating systems, ensuring versatility in heterogeneous IT infrastructures. Its design includes Ethernet LAN connections that facilitate integration into corporate networks. The drive has a standard operating voltage range of 5/12 V , contributing to broad compatibility with various storage hardware. This device is primarily intended for use with compatible products like HP MSA 1040 and 2040, guaranteeing proper functionality within specific HPE storage series. This HDD unit belongs to HP’s midline range, offering a balance of capacity, performance, and cost, backed by a trusted brand in professional solutions. In summary, the HPE J9F43A is a solid solution for those seeking a high-capacity, reliable SAS hard drive to deploy in business environments where efficiency and compatibility are essential. Connections: Ethernet LAN Speed: 7200 rpm 12 Gbps Units: 1 Unit Type: Internal hard disc HDD Colour: Multicolour Material: Iron Interface: SAS Rotation speed: 7200 rpm Compatible: Windows Linux Connectivity: Ethernet LAN Size: 3,5" Voltage: 5-12 V Hard Drive: 6 TB

The HPE P28586-B21 internal hard drive is designed for professional environments that require high reliability and consistent performance in the brand’s servers and storage enclosures. With a capacity of 1.2 TB , it provides sufficient space for databases, virtual machines and critical applications, maintaining a balance between data volume and access speed. Its 2.5" form factor allows integration into compact chassis and high‑density systems, optimising rack space. The drive is a 10,000 rpm HDD SAS , delivering reduced access times and higher performance than lower‑speed disks, making it suitable for intensive read/write workloads. The 12 Gbps SAS interface ensures fast, stable communication with the controller, improving available bandwidth in enterprise systems the mention of SATA connections indicates compatibility within certain mixed backplanes, provided the HPE hardware supports it. Its approximate weight of 390 g is typical for drives in this category, making handling and replacement in racks and hot‑swap trays easier. This model is supplied as a professional‑grade internal hard drive , suitable for RAID configurations and for expanding or renewing the capacity of HPE servers while maintaining consistency with the existing infrastructure. Overall, the HPE P28586-B21 is positioned as a reliable enterprise storage solution for systems that need a balance between performance, capacity and compatibility with HPE platforms. Type: Internal hard disc HDD Colour: Multicolour Power supply: Electric cable Interface: SAS Hard Drive: 1,2 TB Rotation speed: 10000 rpm Connections: SATA Speed: 12 Gbps Size: 2,5" Approx. weight: 390 g