Computer Networks and components

Connections: RJ45 8 Ethernet LAN rj45 x 8 Product with plug: Yes Type of plug: Plug EU Type: Switch Power supply: Electric Network Iincluded Colour: Grey Speed: 16 Gbps 10/100/1000 Mbps Voltage: 12 V Ports: 8 Characteristics: LED in operation indicator Working range for humidity: 10 % - 90 % Approx. temperature: - 20ºC / 70°C

Connections: RJ45 RJ45 x 48 Ethernet LAN Product with plug: Yes Type of plug: Plug EU Type: Switch Power supply: Electric Network Colour: White Frequency: 50-60 Hz 50 - 60 Hz Holder: Multi-support Number of slots: 4 Ports: 48 Characteristics: LED in operation indicator Width: 44 cm Working range for humidity: 10 % - 90 % Approx. temperature: - 20ºC / 70°C Safety: IGMP

Connections: RJ45 RJ45 x 48 Ethernet LAN Product with plug: Yes Type of plug: Plug EU Type: Switch Power supply: Electric Network Colour: White Voltage: 100-240 V 100 - 240 V Frequency: 50-60 Hz 50 - 60 Hz Flash Memory: 64 MB Internal Memory: 256 MB Holder: Multi-support Number of slots: 4 Ports: 48 Characteristics: LED in operation indicator Power: 3600 W Speed: 10/100/1000 Mbps Width: 44 cm Working range for humidity: 10 % - 90 % Form factor: 1U Approx. temperature: - 20ºC / 70°C Safety: IGMP

If you are looking for new market trending items, we present the Switch CISCO MS125-24P-HW ! The Cisco Meraki MS125-24P-HW switch is a managed Layer 2 device designed for enterprise networks requiring high reliability and advanced management capabilities. This switch features 24 Gigabit Ethernet RJ-45 ports , supporting speeds of 10/100/1000 Mbps , providing fast and stable connectivity for multiple devices on the local network. It also includes a PoE (Power over Ethernet) port delivering up to 370W total power, enabling direct powering of compatible devices such as IP cameras, VoIP phones, or wireless access points without additional power cables. Its gray design and compact 1U rack-mount form factor offer an efficient and tidy solution for data centers or communication cabinets. The MS125-24P-HW incorporates advanced switching and security features, including support for key standards like IEEE 802.1D, 802.1Q, 802.1ab, 802.1p, 802.1w, 802.1x , and 802.3ad , ensuring quality of service, authentication, and link aggregation for complex, high-traffic environments. Its switching capacity of 128 Gbit/s and MAC address table holding up to 32,000 entries guarantee efficient and scalable performance for medium-sized deployments. This switch includes an RJ-45 console port for direct and advanced management via local or remote interfaces, making it a key component in modern architectures managed by the Cisco Meraki platform, a leader in cloud-based centralized network control solutions. Its multi-support structure and approximate size of 25 cm make it a versatile device for various network setups. In summary, the Cisco Meraki MS125-24P-HW combines robustness, flexibility, and power to deliver a reliable and professional solution for corporate network infrastructure. Product with plug: Yes Type: Switch Type of plug: Plug EU Power supply: Electric Network 47/63 Hz Colour: Grey Connections: RJ45 RJ45 x 24 PoE x 1 Ethernet LAN Voltage: 100-240 V 100 - 240 V Holder: Multi-support Depth: 25 cm Number of slots: 4 Power: 370 W Width: 44 cm Form factor: 1U Safety: IGMP

The D-Link DES-108/E switch is a network device designed to provide efficient and stable connectivity in home or small office environments, thanks to its 8 RJ-45 ports compatible with transmission speeds of 10/100 Mbps , ensuring smooth communication between different devices via ethernet cable. This model features a compact and functional design with a black finish , made from a combination of metal and plastic materials that guarantees durability and strength, making it easy to integrate into any workspace or home. It operates at a voltage of 5 V , offering energy efficiency and compatibility with most standard power supplies. Additionally, it includes LED indicators that allow easy monitoring of each port’s activity and status, aiding in troubleshooting potential network issues. Equipped with basic technology, the DES-108/E intelligently manages data traffic to optimize overall local network performance, providing an affordable and reliable solution to expand wired connectivity without complications. Its robust build and ease of use make it an essential component for those needing to manage multiple network devices, maintaining stable, low-latency connections. Overall, this switch is a practical and accessible option to improve network infrastructure in environments with basic wired connection needs. Product with plug: Yes Type of plug: Plug EU Type: Switch Power supply: Electric Network Electric cable Colour: Black Connections: RJ45 rj45 x 8 Amperage: 1 A Material: Metal Plastic AC input voltage: 5 V Characteristics: LED indicator Voltage: 5 V Ports: 8 Working range for humidity: 10 % - 90 % - Plug and Play operation- 8 Fast Ethernet ports- Non-blocking architecture: simultaneous full speed on all ports- Fanless, silent operation to fit in any environment- Quality of Service (QoS) queues for traffic prioritisation- Solidly built with metal housing- D-Link Green™ technology, saves energy and increases the product’s lifespanD-Link’s DES-108 Fast Ethernet switch provides a cost-effective way for SOHO and SMB to create a small network and connect computers, wireless Access Points, IP cameras, network printers and other Ethernet devices quickly and easily without complicated configurations. This switch comes with 8 Fast Ethernet ports with an auto-sensing function to detect the maximum speed of the connected devices, allowing you to run your network with the best possible performance. Its fanless design makes the DES-108 completely silent so it is ideal for offices, libraries or meeting rooms. Robust design The DES-108 is designed with durability and performance in mind. The sturdy metal housing will protect it against accidental harm, while helping to dissipate heat and to reduce stress on internal components. The visible LEDs allow for an easy reading of each port status, helping to troubleshoot connectivity problems. For a convenient placement, this switch comes with a wall mounting kit and a slot for a Kensington security lock to protect it from theft. QoS (Quality of Service) Despite being an unmanaged, Plug and Play switch, the DES-108 is able to classify network traffic by assessing the 802.1p field in the Ethernet frames, and forward them out of its ports depending on their priority. This allows for a smooth integration of video, voice and data traffic without delays or loss of quality. Power-saving technology The DES-108 is part of D-Link Green™, D-Link’s eco-friendly technology, providing energy savings, reduced power consumption, and a longer product lifespan without sacrificing operational performance or functionality. This switch implements the 802.3az Energy Efficient Ethernet (EEE) standard, which can save a substantial amount of energy by detecting the port status, putting them in low-power, stand-by mode when no network traffic is detected. This helps businesses to save money by reducing their electricity bills with no compromise on performance. Quality of Service (QoS) support: Y Basic switching RJ-45 Ethernet ports quantity: 8 Power connector: DC-in jack Networking standards: IEEE 802.1p,IEEE 802.3,IEEE 802.3az,IEEE 802.3u,IEEE 802.3x 10G support: N Copper ethernet cabling technology: 100BASE-TX,10BASE-T Full duplex: Y Flow control support: Y Auto MDI/MDI-X: Y MAC address table: 1000 entries Switching capacity: 1.6 Gbit/s Supported data transfer rates: 10/100 Mbps Store-and-forward: Y Maximum data transfer rate: 0.1 Gbit/s Jumbo frames support: Y Packet buffer memory: 0.768 MB MAC address filtering: Y Rack mounting: N Product colour: Black Housing material: Metal LED indicators: Link, Power Certification: RoHS, FCC Class B, ICES-003 Class B, CE Class B, C-Tick Class B, VCCI Class B, cUL, CB Mean time between failures (MTBF): 511323 h Shipping (inner) case height: 44.3 cm Shipping (inner) case width: 26 cm Shipping (inner) case length: 37 cm Shipping (inner) case net weight: 6.1 kg Products per shipping (inner) case: 10 pc(s) Pallet gross weight (air): 357.5 kg Master (outer) cases per pallet (air): 48 pc(s) Products per pallet (air): 480 pc(s) Pallet gross length: 102 cm Pallet gross width: 122 cm Pallet height (air): 2.07 m Pallet gross weight (sea): 357.5 kg Master (outer) cases per pallet (sea): 48 pc(s) Products per pallet (sea): 480 pc(s) Pallet height (sea): 2.07 m Shipping (inner) case gross weight: 7 kg Input current: 1 A Power consumption (typical): 4.5 W Operating temperature (T-T): 0 - 50 °C Storage temperature (T-T): -10 - 70 °C Operating relative humidity (H-H): 10 - 90% Storage relative humidity (H-H): 5 - 90% Package width: 208 mm Package depth: 250 mm Package height: 68 mm Package weight: 610 g Data transfer rate: 200 Mbit/s Dimensions (WxDxH): 162 x 102 x 28 mm Input voltage: 5 V

The DGS-1005P from D-Link is a switch designed to provide efficient and stable connectivity in small and medium environments, ideal for office networks and home systems requiring Power over Ethernet. This device features 5 RJ-45 ports supporting speeds of 10/100/1000 Mbps , ensuring fast and smooth data transfer via Ethernet LAN connections. It stands out by integrating 4 ports with PoE (Power over Ethernet) support , allowing compatible devices such as security cameras or wireless access points to be powered directly through the network cable, without needing extra power adapters. Built in black with a combined metal and plastic structure, the switch offers durability and robustness, and includes wall-mounting capability to save space and ease installation in various settings. Its LED indicators provide clear visual information on connection status and PoE power, facilitating system monitoring and management. With a maximum total power consumption of 30 W , this model balances energy use and supplied power effectively. The DGS-1005P by D-Link is a compact, functional solution to expand and optimize wired networks with advanced features like PoE support, offering reliability and versatility in a discreet format that easily integrates into any network setup. Speed: 10 Gbps Connections: PoE x 4 RJ45 PoE Ethernet LAN RJ45 x 5 Colour: Black Ports: 4 5 Approx. dimensions: 10 x 9,8 x 2,8 cm Type: Switch Product with plug: Yes Type of plug: Plug EU Power supply: Electric Network Iincluded Characteristics: Plug & Play Wall mounting LED indicator Plug and play Power: 60 W 30 W Material: Metal Plastic Width: 10 cm Fast. Compact. Convenient. The D‑Link DGS‑1005P 5‑Port Desktop Gigabit PoE+ Switch enables you to connect Power over Ethernet (PoE) devices such as wireless access points (APs), network video cameras and IP phones to the network. Built with home and small business users in mind, the DGS‑1005P is compact and operates silently, making it ideal for most rooms and offices. Gigabit Performance. The DGS-1005P features plug-and-play installation and requires no configuration.Automatic MDI/MDI-X support on all ports removes the need for crossover cables when connecting to another switch, and auto-negotiation on each port intelligently adjusts the port speed for compatibility with the connected device. With wire-speed filtering and store-and-forward switching, the DGS-1005P maximises network performance while minimising the transmission of bad network packets. Power Over Ethernet+ The DGS-1005P features four Gigabit Ethernet ports that support the IEEE 802.3af and IEEE 802.3at PoE, supplying up to 30 W on each PoE port and providing a total power budget of 60 W.You can connect compatible devices to the DGS-1005P without using an additional power supply. This allows you to save on cabling and power supplies and to install devices on locations without immediate access to power outlets. Green Technology The DGS-1005P features green technology such as IEEE 802.3az Energy-Efficient Ethernet (EEE), link status detection, and cable length detection.EEE adjusts the power consumption of the switch based on network utilisation, reducing energy use during periods of inactivity. Link status detection powers down unused ports, saving power when connected devices are shut down or disconnected. Cable length detection adjusts the power output of the port based on the cable length, reducing the power requirements of the switch. Compact and Silent The compact design of the DGS-1005P allows placement in most locations, including those where space is at a premium.The desktop form factor provides everything you need to set up a new network or expand an existing network, while the fanless design ensures silent operation even in noise-sensitive areas such as workstations and meeting rooms. Switch type: Unmanaged Switch layer: L2 Quality of Service (QoS) support: Y Basic switching RJ-45 Ethernet ports quantity: 5 Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000) Gigabit Ethernet (copper) ports quantity: 5 Power connector: DC-in jack Networking standards: IEEE 802.1p,IEEE 802.3,IEEE 802.3ab,IEEE 802.3af,IEEE 802.3at,IEEE 802.3az,IEEE 802.3u,IEEE 802.3x 10G support: N Copper ethernet cabling technology: 10BASE-T,100BASE-TX,1000BASE-T Full duplex: Y Auto MDI/MDI-X: Y MAC address auto-learning supported: Y MAC address table: 2000 entries Switching capacity: 10 Gbit/s Store-and-forward: Y Jumbo frames support: Y Packet filtering: 7.44 Mpps Rack mounting: N Product colour: Black Housing material: Metal LED indicators: Activity, Link, PoE, Power, Speed, Status Wall mountable: Y Certification: CE, BSMI, FCC , VCCI, RCM, cUL, CB, LVD, BSMI Buffer size: 64 KB Plug and Play: Y Power supply included: Y Power over Ethernet (PoE): Y Power over Ethernet (PoE) ports quantity: 4 Power over Ethernet (PoE) power per port: 30 W Total Power over Ethernet (PoE) budget: 60 W Operating temperature (T-T): 0 - 40 °C Storage temperature (T-T): -10 - 70 °C Operating relative humidity (H-H): 0 - 95% Storage relative humidity (H-H): 0 - 95% Width: 100 mm Depth: 98 mm Height: 28 mm Weight: 260 g