TP-Link

Jeśli jesteś miłośnikiem informatyki i elektroniki , lubisz być na bieżąco z nowościami technologicznymi i nie umyka Ci żaden szczegół, kup Moduł optyczny SFP MonoModo TP-Link POE4818G po najlepszej cenie. Injektor PoE TL-POE4824G marki TP-Link to urządzenie zaprojektowane do dostarczania zasilania i łączności do sprzętu sieciowego za pomocą jednego kabla, ułatwiając czyste i efektywne instalacje. Ten injector obsługuje Power over Ethernet (PoE) 48 V z mocą wyjściową 18 W , co pozwala zasilać kompatybilne urządzenia bez potrzeby osobnych przewodów elektrycznych, idealne dla kamer IP, punktów dostępowych Wi-Fi czy telefonów VoIP. Posiada interfejs Gigabit Ethernet gwarantujący prędkości transferu 10, 100 i 1000 Mbit/s , kompatybilny z technologiami kablowymi 10/100/1000 oraz kablami od CAT3 do CAT6, zapewniając stabilne i szybkie połączenie w środowiskach biznesowych i domowych. Dzięki prostej konfiguracji i funkcji plug-and-play ułatwia instalację, a montaż ścienny pozwala na optymalne wykorzystanie przestrzeni. Urządzenie ma dwa porty RJ45 (wejściowy i wyjściowy), jest białe i kompaktowe o wymiarach 85,8 mm szerokości, 43,9 mm głębokości i 35 mm wysokości , co umożliwia dyskretne wpasowanie w każde miejsce techniczne. Zakres pracy obejmuje temperatury od 0 do 40 °C i wilgotność względną od 10 do 90% , gwarantując stabilność w różnych warunkach środowiskowych. Dodatkowo posiada diody LED sygnalizujące zasilanie i jest dostarczany z kablem zasilającym, kompatybilnym z napięciem wejściowym 100-240 V i częstotliwością 50-60 Hz . TL-POE4824G spełnia certyfikaty zgodności i normy międzynarodowe takie jak CE, FCC i RoHS , zapewniając jakość i bezpieczeństwo użytkowania. Maksymalny zasięg działania wynosi 100 metrów , co odpowiada standardowym wymaganiom instalacji sieciowych. Ten injector to praktyczne i niezawodne rozwiązanie do zasilania i przesyłu danych urządzeń PoE w różnych środowiskach, wspierając projekty sieciowe z wysoką kompatybilnością i efektywnością energetyczną. Kolor: Biały Łącza: Ethernet LAN 2 RJ45 Właściwości: Montaż ścienny Plug and play Łatwa instalacja Interfejs: Gigabit Ethernet Częstotliwość: 50 - 60 Hz Zawiera: Kabel zasilający Wall mounting kit Napięcie: 100-240 V Prędkość: 10/100/1000 Mbps Zakres roboczy wilgotności: 10 % - 90 % Przybliżona temperatura: -40º / 70º

The multimode media converter TP-Link MC200CM V3 is a professional solution for integrating copper and fiber networks, converting signals between 1000Base-T (RJ45) and 1000Base-SX (SC) with Gigabit speed of 1000 Mbps / 1000 Mbit/s . Designed to work with multimode fiber optic , it supports cable diameters of 50/125 and 62.5/125 μm and uses a short‑wave 850 nm laser , enabling stable links with a maximum transmission distance of about 550 m (0.55 km), ideal for switch interconnection, network backbones or segment extension in buildings. It complies with the main network standards IEEE 802.3ab, IEEE 802.3i, IEEE 802.3u and IEEE 802.3z , ensuring compatibility with existing Gigabit Ethernet infrastructures, and offers one RJ45 Ethernet LAN port and one SC fiber channel port with wired connectivity. It includes Auto MDI/MDI-X on the TX port, eliminating the need for crossover cables and simplifying installation, as well as configurable Force / Auto transfer mode on the FX fiber port to adapt to different devices. Its compact 94.5 x 73 x 27 mm black housing allows standalone desktop use or integration into the TP-Link 19” rack , and it provides LED link and status indicators on the front panel for quick connection diagnostics. The converter includes DC power input with maximum consumption of only 5.5 W , is certified FCC, CE and RoHS , and is suitable for typical working environments with an operating temperature range of 0 to 40 °C and relative humidity of 10% to 90% , delivering a reliable, efficient solution for extending Gigabit networks over multimode fiber in professional and corporate installations. Overall, this model is positioned as a robust, standards‑compliant media converter that is easy to integrate into high‑performance Ethernet infrastructures. Power supply: Electric Network Wired Approx. dimensions: 9,45 x 7,3 x 2,7 cm Connections: SC x 1 Ethernet LAN RJ45 RCA Range: 0,55-10 Km 550 m Characteristics: Light indicator Non-stick LED indicator Type of plug: Plug EU Type: Router Wired Fibre optic Product with plug: Yes Width: 95 mm 9,5 cm Depth: 73 mm Speed: 1000 MB/s 1000 Mbps Wavelength: 850 nm Technology: Wired Certificate: CE FCC RoHS Colour: Black Grey Material: Metal Copper Connectivity: Wi-Fi Voltage: 240 V Interface: Gigabit Ethernet Number of pieces: 4 Pieces Amperage: 1 A Working range for humidity: 10 % - 90 % Approx. temperature: -40º / 70º Data transfer: 1000 Mbit/s What This Product DoesThe MC200CM is a media converter designed to convert 1000BASE-SX fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX standards, the MC200CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC200CM supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 850nm on both transmitting and receiving data.Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK´s 19´system chassis, Auto MDI/MDI-X for TX port, and front panel status LEDs. The MC200CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 0.55 kilometers. Maximum data transfer rate: 1000 Mbit/s Networking standards: IEEE 802.3ab,IEEE 802.3x,IEEE 802.3z Ethernet interface type: Gigabit Ethernet Ethernet LAN data rates: 1000 Mbit/s Auto MDI/MDI-X: Y Fiber optic connector: SC Connectivity technology: Wired Ethernet LAN (RJ-45) ports: 1 Fiber ports quantity: 1 Maximum transfer distance: 550 m Wavelength: 850 nm Internal: Y LED indicators: Link Product colour: Black Certification: FCC, CE Power consumption (typical): 5.5 W Width: 94.5 mm Depth: 73 mm Height: 27 mm Operating temperature (T-T): 0 - 40 °C Storage temperature (T-T): -40 - 70 °C Operating relative humidity (H-H): 10 - 90% Storage relative humidity (H-H): 5 - 90% Sustainability certificates: RoHS

Approx. dimensions: 9,45 x 7,3 x 2,7 cm Range: 0,55-10 Km 10 km Characteristics: Light indicator LED in operation indicator Certificate: CE FCC Width: 9,5 cm Depth: 73 mm Connections: RJ45 x 1 Ethernet LAN SFP RJ45 Type: Wired Cabling Fibre optic Speed: 1 Gbps 1000 Mbit/s 10/100/1000 Mbps Colour: Black Grey Material: Copper Voltage: 9 V Channels: 1 Interface: Gigabit Ethernet Power supply: Wired Working range for humidity: 10 % - 90 % Approx. temperature: -40º / 70º Data transfer: 1000 Mbit/s

Type: Laptop Charger Fibre optic Product with plug: Yes Type of plug: Plug EU Power supply: Electric Network Colour: Silver Connections: SFP Speed: 1250 Mbit/s AC input voltage: 3.3 V

The TP-Link Archer TX20E network card is an advanced solution for those looking to upgrade their desktop computer’s connectivity with the latest wireless technology. Equipped with Wi-Fi 6 and Bluetooth 5.2 , this card delivers significantly higher data transfer speeds compared to previous generations, resulting in more stable connections and greater efficiency in environments with multiple connected devices. The external antenna system optimizes signal reception and range, ensuring wide and consistent coverage on both 2.4 GHz and 5 GHz bands. Thanks to its PCI Express interface , installation is straightforward and compatible with a wide range of modern motherboards. Additionally, integrated Bluetooth makes it easy to connect wireless peripherals such as headphones, keyboards, and mice, expanding your device’s capabilities without the need for extra adapters. The black design perfectly complements any hardware setup, and the included installation guide ensures a clear assembly process even for users with little experience. With these features, the TP-Link Archer TX20E stands out as an efficient and flexible choice for those who demand high performance and connectivity for modern wireless networks and peripherals. Connectivity: Bluetooth Wi-Fi 6 GHz Wi-Fi Bluetooth 5.2 Type: Wireless network Wi-Fi Network Card Wireless Antenna Speed: 1.0 Gbps Product with plug: Yes Type of plug: Plug EU Power supply: Electric Network Colour: Black Characteristics: Wireless Installation guide included Plug & Play Sash: 2,4 GHz - 5 GHz Weight: 100 g Working range for humidity: 10 % - 90 % Approx. temperature: -40º / 70º Includes: Mounting struts User manual Connections: PCI Express

The TP-Link Archer TXE75E wireless network card is a high-performance device designed to provide advanced connectivity for desktop computers via a PCI Express interface. This card stands out for its compatibility with the 2.4 GHz, 5 GHz, and 6 GHz frequency bands, integrating Wi-Fi 6E technology that ensures ultra-fast communication speeds of up to 5400 Mbps , significantly enhancing browsing, streaming, and online gaming experiences. Additionally, it includes the latest version of Bluetooth 5.2 , allowing stable and efficient wireless connections with compatible devices such as headphones, keyboards, or mice, with lower power consumption and improved range. Its black design allows for discreet aesthetic integration inside the PC. The included installation guide enables quick and easy setup, ideal for users seeking a technology upgrade that supports current wireless connectivity demands. This card combines compatibility, speed, and cutting-edge technology to optimize the wireless network experience on PCs reliably and durably. The TP-Link Archer TXE75E thus positions itself as a versatile and efficient solution for those needing to make the most of modern wireless connections. Product with plug: Yes Type of plug: Plug EU Power supply: Electric Network Type: Wireless Colour: Black Red Characteristics: Wireless Installation guide included Connectivity: Bluetooth Wi-Fi Bluetooth 5.2 Wi-Fi 6 GHz Operating System: Windows 10 Pro Windows Sash: 2,4 GHz - 5 GHz Frequency: 5 GHz Working range for humidity: 10 % - 90 % Compatible: PC/Server Connections: PCI Express USB 2.0 x 2